THSIM9’s 1991 F250 Project

THSIM9 · Jun 3, 2024

Started on the wiring process. Dash removed, all unused items (cruise control, door buzzer, etc) have been trimmed out of the harness and I started chasing wires in the engine harness so I can get everything put back together properly.

You must be registered for see images attach

Nero · Jun 3, 2024

Nice boat

THSIM9 · Jun 3, 2024

Nero said:
Nice boat

It is a super nice boat. It’s my father in laws. It’s a 1991 (matches the year of my truck) and it looks brand new and runs fantastic. We’ve been out fishing on it a couple times this year already and it’s a blast.

You must be registered for see images attach

The_Josh_Bear · Jun 4, 2024

Dang, on the wiring, better you than me! That's a chore. Truck is looking sweet, keep up the good work!

I agree on the boat, I grew up fishing but have barely gone as an adult. I miss it! Smallies are the BEST! I only ever got to catch a few of them, best fighters I've faced in fresh water. My then step-dad took me up to Canada and these dang fish would hit topwater in 30' with no structure or vegetation around at all. It was UNBELIEVEABLE!

THSIM9 · Jun 8, 2024

Wiring fun today.

Completely butchered the painless harness so that my knuckle dragging self could understand exactly where everything was going to land. Got the fuse block mounted, alternator is wired in, actually the entire positive side is pretty much done. I need to start landing wires tomorrow and get the engine bay wrapped up.

You must be registered for see images attach

The clutch pedal does clear the fuse block. It’s just the angle of the photo.

THSIM9 · Jun 10, 2024

Pulled the rest of the interior, cleaned, and installed dynamat. Started working out more kinks with wiring. I’m going slow identifying every wire and where it goes, labeling accordingly, so that when it comes time I can make all my connections and get everything into wire loom and tucked away. It’s a slow process but it should pay dividends in simplicity and function now that I will know exactly what ever wire is doing.

You must be registered for see images attach

Nero · Jun 10, 2024

I did that with my samurai when I converted it from carburated to obd2 efi, having neat wiring is just the best, plus easier to diag if something messes up

Looking good!

Old Goat · Jun 10, 2024

Lookin good. I Dyna matted my 85 extra cab, did back and side wall also.
Then got carried away and did the 86 also, plus inside the doors.
Looks like you totally covered the trans plate cover. Be a good idea to not
cover the screws, and the screw holes for the rubber boot. some day you
may need to remove the plate.

East Wood sells their brand of material a bit cheaper than Dyna Mat, and
probably the same exact stuff.
I saw another brand "B-Quiet. Just received a roll 12" sqft roll for $48 to check
the quality. Looks close to same thickness.
They have a sale going on now.

B-Quiet Ultimate Sound Deadener 12 SqFt. roll

Experience a Noise-Free Drive! With the B-Quiet Ultimate Sound Deadener, noise stands no chance in your vehicle! Water-resistant, temperature-regulating and, most importantly, noise-deadening, all 12sq.ft of this Ultimate sound deadener is the missing piece you need for your vehicle. Get the...

b-quiet.com

Just reread through your thread, you are going to have a nice truck when through.

There is some threads on changing the side quarter window with the divider, to
the later style of the 92 - 97 all one piece window.
If interested I`ll post what I have come across.

Goat

THSIM9 · Jun 11, 2024

Old Goat said:
Lookin good. I Dyna matted my 85 extra cab, did back and side wall also.
Then got carried away and did the 86 also, plus inside the doors.
Looks like you totally covered the trans plate cover. Be a good idea to not
cover the screws, and the screw holes for the rubber boot. some day you
may need to remove the plate.

East Wood sells their brand of material a bit cheaper than Dyna Mat, and
probably the same exact stuff.
I saw another brand "B-Quiet. Just received a roll 12" sqft roll for $48 to check
the quality. Looks close to same thickness.
They have a sale going on now.

B-Quiet Ultimate Sound Deadener 12 SqFt. roll

Experience a Noise-Free Drive! With the B-Quiet Ultimate Sound Deadener, noise stands no chance in your vehicle! Water-resistant, temperature-regulating and, most importantly, noise-deadening, all 12sq.ft of this Ultimate sound deadener is the missing piece you need for your vehicle. Get the...

b-quiet.com

Just reread through your thread, you are going to have a nice truck when through.

There is some threads on changing the side quarter window with the divider, to
the later style of the 92 - 97 all one piece window.
If interested I`ll post what I have come across.

Goat

Thanks Goat for the recommendations. I grabbed a roll of that B-quiet material to finish the cab, doors, etc. it’s quite a bit cheaper per SF than dynamat.

Old Goat · Jun 11, 2024

Post what you think about it.
I read on (maybe FTE Forum) guys using this stuff.
Has 1/8" foam on back side with stick um, and tin
foil on front. Bought a roll and used it on the back wall
and side walls of the extra cab over the top of the Dyna Mat.
Could use it on the floor also, but would use the Dyna mat
type stuff first, as the tar backing will make a water tight seal
when rolled in tight with the wood roller.

Frost King E/O 12 in. x 15 ft. Self-Stick Foam/Foil Duct Insulation FV516 - The Home Depot

The Thermwell Products Co., Inc. 12 in. x 15 ft. Duct Insulation insulates both heating and air conditioning ducts. The foam insulation helps reduce cooling loss in summer and heat loss in winter. It is self-adhesive to make installation easy.

www.homedepot.com

Was $19 before Covid.

Back when I used the Dyna Mat it was $160+ a box.
Searching found that Eat Wood had the same stuff, (their Brand) for $92.
Now it is $164...yikes....before Covid.

X-MAT® Sound Deadening 18x31 inches 34.8 SQ FT

Eliminate road noise and heat by applying under carpet, door panels, inner firewall and more.

www.eastwood.com

Goat

THSIM9 · Jul 15, 2024

After a couple weeks of not touching this project I was back in the shop this weekend.

The B-Quiet material was great. I would say it’s close enough to the dynamat to be a consideration.

Got the intake installed, some more wiring figured out, and the dash put back in the truck. I got the custom gauge cluster roughed in, just need to paint and mount gauges. Unfortunately the gauges ended up slightly off center but I’m going to live with it for now. I’ve gotta get this thing done and back on the road.

You must be registered for see images attach

DaveBen · Jul 15, 2024

If you look at where the string column goes, they are not out of line.

THSIM9’s 1991 F250 Project

THSIM9

Registered User

Nero

HD Diesel nut

THSIM9

Registered User

The_Josh_Bear

Full Access Member

THSIM9

Registered User

THSIM9

Registered User

Nero

HD Diesel nut

Old Goat

Full Access Member

B-Quiet Ultimate Sound Deadener 12 SqFt. roll

THSIM9

Registered User

B-Quiet Ultimate Sound Deadener 12 SqFt. roll

Old Goat

Full Access Member

Frost King E/O 12 in. x 15 ft. Self-Stick Foam/Foil Duct Insulation FV516 - The Home Depot

X-MAT® Sound Deadening 18x31 inches 34.8 SQ FT

THSIM9

Registered User

DaveBen

Supporting Member

Similar threads

Latest posts

Forum statistics

Members online

Share this page