hacked89
Full Access Member
Let me know if you have any questions.
xc_hide_links_from_guests_guests_error_hide_media
Thanks - good question on the split bushing. It’s working as is but I have my eye on it.One of the better tutorials for this job. Nice work. I noticed the split bushing for the upper ball joint was pretty rusty. Did you pop it loose, or did it work as is? I failed to remove and clean the bushings on my axle rebuild, and it may have contributed to a loose upper ball joint after only 2 years. When I redid the ball joints I followed the 3-step torque process but still had some binding, and resulting memory steer. A few "love taps" on the upper ball joint was enough to relieve the tension. Apparently, you're supposed to be able to turn the knuckles with one finger, even with new ball joints.