jwsfarrier
Full Access Member
Russrepair has OEM Motorcraft thermostats he bought out from a Ford dealer. Get'em while you can
Good call on the actual boiling temp. That said, 195* is about where mine sits at cruising speeds on the freeway so it should definitely be open at least somewhat by then.Hmm, fair enough. That's the same link I purchased mine from. Our boiling point is around 195*F here, which is why I gave it a little time. Might give it a go in some cooking oil on the stove.
Thanks. 9500'Good call on the actual boiling temp. That said, 195* is about where mine sits at cruising speeds on the freeway so it should definitely be open at least somewhat by then.
Just cause I'm curious, what's your altitude?
Dang that puts “mile high” to shame a bit. I’ve always lived at sea level and get really tired and short of breath visiting places above 6k’ - a non turbo idi probably feels even worseThanks. 9500'
I've been running the black faced mechanical one since 2019. Grabbed it from the RV before I sold it and moved it to my current van.A $30 Equus mechanical coolant temp gauge has worked well for me.
Where is your pressure sensor?A $30 Equus mechanical coolant temp gauge has worked well for me. Again, test it in boiling water to make sure it's accurate. I swapped out to Auber Instruments digital gauges so I could wire in my own idiot light/alarm combo--their sensors seem to be accurate as the mechanical and digital read the same but response time is better on the digital. I also recommend their oil pressure sensor & gauge combo--381k on the engine and 38psi at ~2000RPM and 14psi idle though I haven't compared with a mechanical pressure gauge. An it's kind of interesting to see oil pressure drop as the oil temp increases. On a cold morning I see upwards of 52psi.
I just used the factory sensor location. Pretty sure the sensor is 1/8 npt and the factory is 1/4 npt.Where is your pressure sensor?
The kit comes with the required adapter, in any caseI just used the factory sensor location. Pretty sure the sensor is 1/8 npt and the factory is 1/4 npt.