polksfinest
Registered User
Hello all I built a 6.2 with 18:1 pistons and new 6.5 castings for the heads and I put it in a land rover discovery the problem I am having is it gets hot real fast I mean like 220 hot in about .5 of a mile all of the cooling parts are new and I have the dual thermostat housing with new thermostats I have a new 2 row 1.5 inch tube alum radiator that is the same size as the brass 4 core that I had in another discovery I removed this engine and rebuilt it to install into this land rover and now it is giving me this I also have a vibration that I did not have before the motor has a fluid damper installed and a pete jackson gear drive could the gear drive cause the vibration? as for the over heating thing I was wondering if the timing being off could affect it I also did the rear cross over mod but instead of tying it into the thermo housing I tied it into the top rad hose with a adapter any help would be great thanks