Recent content by Cowboy_Customs

  1. C

    1990 F350 dump bed.

    Need more info! Is it IDI? Auto, manual? rear end ratio? What needs replacing? more info!
  2. C

    95 dodge 3500 cummins

    Sellin my 95 3500 club cab 4x4 dually. its a 5speed, was rebuilt 80K +/- ago when the P.O. had it. Needs either timing or injectors. It was timed to 17.5* but it may have slipped. It does not like to run when its cold (at first anyway) lots of blue smoke till warm. So either sticks or timing. It...
  3. C

    first off hi guys and i have a fuel prob i need help

    Yea check the preheater, thats before the lift pump. Could be getting clogged. But I might be inclined to say the LP is bad. Bleed the system, dont try n start the truck, crack open the bleeder on the fuel filter housing, and pump the LP and see if you got any fuel comming out of the bleeder.
  4. C

    Need help with fastener tork ?

    I will have to look at my FSM and get back to you. It is at my shop unfotunatly. I think 80 ft lbs? That sounds correct, but dont quote me.
  5. C

    WTB. Gen1 turbo

    Any diesel shop can get you a rebuild kit. Just get the numbers off the tag, and take them to a diesel shop. OR look around for a used WH1C or HX-35 for a better then stock, stock, replacement. I got one of my WH1C for the price of shipping, they are out there. Any of the Cummins specific forums...
  6. C

    want more power with little smoke.

    If you are looking for power off the line, you need a 0 plate, it is the most agressive. Take out that number 8 and grind it flat. The AFC apring kit is not something you want for little or no smoke, the AFC is what limits fueling under no/low boost conditions. So if anything you will want to...
  7. C

    1990 D350 Wheel upgrade?

    Dodge wheels are hub centric. Meaning they are centered on the hub. Dodge uses a 4 3/4 hub. GM is 4 1/2. Dodge I believe released a TSB stating to use 2 conical nuts to truely center the wheel, bolt on with the other 6 nuts, remove the 2 conical, and place the last 2 on. All dodge to current is...
  8. C

    WTB. Gen1 turbo

    "baby" H1C on a non IC 1st gen Cummins. I would suggest either a rebuild kit (cheap) or finding a WH1C or an HX-35. I would have to think on it, but I have a WH1C setting on the shelf, but I also have one in my current truck so im thinking spare. My spare needs seals too.
  9. C

    Cummins 12 valve cylinder head for sale

    The only difference in 12 valve heads are the early 1st gen (non IC) 89-91.5 and later 1st gen (IC) 91.5-93 The early 1st gen had 9mm injector ports that are prone to cracking. Which head is it? 9mm or 7mm injector port?
  10. C

    Anyone have a B&W Hitch to sell for 80-96 F250/350 w/overloads. Kit#1110?

    I hear ya there! Well, it looks like I will be hangin on to em, my trailer dealer wont give me crap for em and he wants wayyy too much for what I want. So give me a hollar if things change.
  11. C

    Anyone have a B&W Hitch to sell for 80-96 F250/350 w/overloads. Kit#1110?

    Yeah a gooseneck is a much better trailer overall, higher hauling capacities, better trailer control, from general drving down the road to parking the trailer, much more even weight distribution on the truck. A gooseneck trailer, brand new can be as little as 3000 dollars depending on what you...
  12. C

    Anyone have a B&W Hitch to sell for 80-96 F250/350 w/overloads. Kit#1110?

    I have one. I got it a few years ago, and it is JUST the frame plates. You would need the center piece, but I am looking to off load it. I priced the center plate at a local dealer last year for 250 bucks. It is the NON overload version, BUT includes instructions to make it fit with overloads...
  13. C

    95 Dodge Ram 12v ext.cab 4x4 dually $2500

    ohoh pick me pick me!! PM commin yer way
  14. C

    is this a good deal??

    its on the money for a p-pump converted 1st gen with those kind of mods. Offer 5K
  15. C

    Banks Automatic Turbo Kit

    What about shipping costs, and does it include the tranny shift kit module?
See more

Latest posts

Forum statistics

Threads
91,378
Posts
1,131,440
Members
24,180
Latest member
ntjapkes

Members online

Total: 743 (members: 11, guests: 732)

Share this page

Top