Recent content by Minuteman96

  1. Minuteman96

    12V power for accessories

    Got it. Thanks for all the help you dudes, I appreciate it a ton
  2. Minuteman96

    12V power for accessories

    Okay so just to clarify from everyone’s ideas and info, I run a fuze box from my battery, to the accessories with the continuous relay inline between the battery and fuze box; that relay will be powered from the radio wire.
  3. Minuteman96

    12V power for accessories

    Yeah I knew that, but I didn’t know about overloading the FSS wire with multiple extra circuits attached to it. If I remember correctly, that wire isn’t very large. Thinking maybe tapping into the radio will be the better route
  4. Minuteman96

    12V power for accessories

    You power this solenoid from turn key power and then can use it for multiple circuits? Correct?
  5. Minuteman96

    12V power for accessories

    Now what about multiple relays? Could I use one relay for multiple circuits? Or would each circuit need it’s own relay so I’d need to branch off the FSS wire as many circuits I need
  6. Minuteman96

    12V power for accessories

    I’m looking to put in an under hood bus bar for pulling 12V power to my aftermarket gauges, probably some extra lights, usb power sources as well as fixing my no power situation on the factory “power source.” I want a clean organized source of power for more possible accessories in the future...
  7. Minuteman96

    Oil Pressure Gauge reading way low

    I’ve had this problem for awhile now, even on the previous motor that was in the truck. truck runs fine, I know it’s got oil pressure, but man this gauge bothers the hell out of me. It reads low, like just over the left white line low. It never goes below that, sometimes it’ll go above that, but...
  8. Minuteman96

    Oil and coolant mixing

    Classic Diesel Designs sells an oil cooler reseal kit. If it ends up being the cooler, I’d recommend resealing before buying a new one. Probably less expensive and the modern quality is no match for back in the day.
  9. Minuteman96

    Another good reason to stay out of Calif.

    Tons of SoCal and Vegas people moving to Utah. My in-laws moved out there about 8 years ago and it’s being slowly overran just like every state in this country. The Morman thing is definitely prevalent but overblown in my opinion. Lots of great people living there.
  10. Minuteman96

    Another good reason to stay out of Calif.

    I agree with this wholeheartedly. I live in the Northern California foothills, gold country. It’s a totally different world here than what you see in Sacramento/Bay Area/SoCal. The demographics of the area are consistent, the crime is lower, the people are friendlier and more neighborly, the...
  11. Minuteman96

    7.3 Powerstroke/6.0 Powerstroke Vaccuum Pump

    I dealt with this issue just recently. I swapped over a drive from a 87 6.9 to my motor but put a 93 serpentine pulley on it. I beefed with that pulley and drive for hours until I realized, that sucker ain’t going on and the shafts were different sizes, literally a 16th, probably a 32nd of an...
  12. Minuteman96

    7.3 Powerstroke/6.0 Powerstroke Vaccuum Pump

    For the 6.0 pumps I’ve found, it was for the 04-10 years, and I’ll be damned if it doesn’t Look identical to our pump aside from the pulley and the line coming off of the pod.
  13. Minuteman96

    7.3 Powerstroke/6.0 Powerstroke Vaccuum Pump

    Anybody used one on one of our IDIs? The mounts look identical, and the pod/pump mechanism looks hardly any different. I read the later pumps put out more vacuum which I can’t imagine is a bad thing, and a 6.0 vacuum pump is cheaper than a junky dorman pos that I’d rather not waste my money on...
  14. Minuteman96

    Looking to build a custom turbo set up

    I know my IP is on its way out, it’s blowing white smoke that gets lesser or greater with timing, so I was already planning on picking up a CDD soon. Thanks for sharing your setup. That 300 is awesome.
  15. Minuteman96

    Looking to build a custom turbo set up

    Summit Racing has aftermarket heaters that have pretty solid ratings. I like my under the hood roomy, so having a reasonably sized heater system I can put in the cab is more attractive to me than the giant AC/heater box they put in these trucks.
See more

Latest posts

Forum statistics

Threads
91,344
Posts
1,130,730
Members
24,143
Latest member
Cv axle

Members online

Total: 369 (members: 8, guests: 361)

Share this page

Top